Clamp Meter Electrical Test Kit
CL120KIT
- Measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test-leads
- Detects the most common wiring problems in standard and GFCI receptacles, including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- Line splitter allows the measurement of current draws of up to 15 A without splitting the load's power cable
- CAT III 600 V, Class 2, Double insulation safety rating
- AC auto-ranging 400 amp digital clamp meter
- Back-lit display for clear readings
- Includes a case, test leads and batteries
Klein Tools Clamp Meter Electrical Test Kit includes the CL110 400A Auto-Ranging Digital Clamp Meter, RT210 GFCI Receptacle Tester and 69409 Line Splitter 10x. The Electrical Test Kit allows for easy testing of live circuits and measuring of current and voltage. Included is a carrying pouch, test leads and batteries.
Specifications
Type:
Clamp Meter Kit
Application:
Testing and Measuring Voltage
Special Features:
Back-lit Display For Clear Readings
Overall Length:
3.02'' (7.7 cm)
Overall Height:
8.7'' (22.1 cm)
Overall Width:
1.61'' (4.1 cm)
Material:
ABS/Electronics
Batteries:
3 x AAA
Jaw Size:
1.61'' (4.1 cm)
Drop Protection:
6.6' (2 m)
Display:
2000 Count Reverse Contrast LCD
Functions:
TRMS, AC Current, NCVT, AC/DC Voltage, Resistance and Continuity
Voltage:
600 V AC/DC
Pollution Degree:
8.7'' (22.1 cm)
Standard:
CAT III 600V
Included:
CL120 Digital Clamp Meter with Test Leads; 69409 Line Splitter 10x; RT210 GFCI Receptacle Tester; Carrying Pouch; Instructions and All Required Batteries
Weight:
15 oz (426 g)
UPC:
092644692840
Warnings
- Do not attempt to measure resistance or continuity on live circuits.
- Read, understand and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before every use.
- Before every use, verify meter operation by measuring a known voltage or current.
- Do not use the meter during electrical storms or in wet weather, and do not use the meter or test leads if they appear to be damaged.
