Non-Contact Voltage and GFCI Receptacle Premium Test Kit
NCVT1XTKIT
- Voltage Tester provides non-contact detection of 70 to 1000V AC in cables, cords, circuit breakers, lighting fixtures, switches, non tamper-resistant outlets and wires
- Durable tester is dustproof and waterproof, with an IP67 rating and 9.8-foot (3 m) drop protection
- Volt Pen with high intensity, bright green LED indicates the tester is Powered ON
- When a voltage is detected, a high intensity, bright red LED illuminates and an audible tone will sound
- CAT IV 1000V safety rating, low battery indicator and easy access to battery compartment
- GFCI Tester detects the most common wiring problems in standard and GFCI receptacles: open ground, reverse polarity, open hot, open neutral and hot/ground reversed
- CAT II 300V safety rating, works on GFCI outlets, and confirms the operation of the ground fault protective device
- NCV Tester is not recommended for testing tamper-resistant outlets; use Cat. Nos. NCVT-2P or NCVT-3P in low voltage mode
Klein Tools Non-Contact Voltage and GFCI Receptacle Premium Test Kit (Cat. No. NCVT1XTKIT) includes a Non-Contact Voltage Tester and a GFCI Receptacle Tester. The Non-Contact Voltage Tester (Cat. No. NCVT1XT) detects a voltage of 70 to 1000V AC, is dustproof and waterproof with an IP67 rating, and has a durable 9.8-Foot (3 m) drop protection. The GFCI Receptacle Tester (Cat. No. RT210) is designed to detect the most common wiring problems in standard and GFCI receptacles.
Specifications
Type:
NCVT1XT: Voltage Tester Pen; RT210: GFCI and Standard Receptacle Tester
Application:
NCVT1XT: Non-Contact Detection and Testing of AC Voltage; RT210: Determine wiring condition in power socket
Special Features:
NCVT1XT: Dustproof and Waterproof; Low Battery Indicator; Easy Access Battery Compartment; RT210: Convenient Chart on the Tester; Includes GFCI Tester
Overall Length:
NCVT1XT: 5.34'' (13.6 cm); RT210: 1.62'' (4.1 cm)
Overall Height:
NCVT1XT: 0.97'' (2.5 cm); RT210: 2.88'' (7.3 cm)
Overall Width:
NCVT1XT: 1.08'' (2.8 cm); RT210: 1.88'' (4.8 cm)
Material:
Polymer Body and Electronic Components
Batteries:
NCVT1XT: 2 x AAA
Included:
NCVT1XT Non-Contact Voltage Tester; RT210 GFCI Outlet Tester; Instructions and All Required Batteries
Standard:
NCVT1XT: CAT IV 1000V; RT210: CAT II 300V
Weight:
NCVT1XT: 1.7 oz (47 g); RT210: 1.9 oz (54 g)
UPC:
092644693908
Warnings
- Read, understand and follow all warnings, cautions, safety information and instructions in this manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
- Never assume that neutral or ground wires are not live. Neutrals in multi-wire branch circuits may be energised when disconnected and must be retested before handling.
- Always consult a qualified electrician to resolve wiring problems.
- Always wear approved eye protection.
