Grip for High-Strength Cables - 5.5 mm

1692-5

  • Designed for cable sizes from 0.218” to 0.55” (5.54 to 13.97 mm)
  • Double ''V'' grooves give four-point contact, reducing the chance of slipping and providing proper alignment of the wire and cable
  • For larger conductors, see our grips with round inside-jaw contours
  • Manufactured from drop-forged, heat-treated steel for excellent durability
  • Made in the USA
Videos

Designed for use on aluminium, copper, weatherproof coated wire, PVC-covered conductors, and messenger and guy strand. The Chicago-style grip was designed for cable sizes from 0.218'' to 0.55'' (5.54 mm to 13.97 mm). When pulling EHS (extra-high-strength) galvanised-steel cable, the galvanising has a tendency to coat the jaws of any grip, causing the cable to slip. Double 'V' contour reduces the possibility of slippage and damage to the cable.

Specifications
Type:
Chicago Grip
Application:
Extra-high-strength cables, messenger, guy strand
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
N
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Double V
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
5.4 lb (2.5 kg)
UPC:
092644471834
Additional Information
Feature Icon klein/wf_grips-doublev-jaw.jpg
Warnings
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near live lines, ground, insulate or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.