Heavy-Duty Side-Cutting Pliers - Insulated
20009NEEINS
- Insulated pliers are 1000V Rated for safety on the job and VDE Certified with unique three-part insulation, with a white underlayer that provides a warning sign when the insulation may be compromised
- Cuts ACSR, screws, nails and most hardened wires
- Streamlined design with sure-gripping, cross-hatched knurled jaws
- Multi-colour, sleek design with small thumb guards for ease of handling and easy storage in your toolbelt
- Made in the USA
- Durable, moulded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools
- Precision machined knives cut cleanly and crisply, even on fine stranded wire, mule tape and pull line
Klein Tools Electrician's Insulated, High-Leverage, Side-Cutting pliers are 1000V rated and VDE certified for safety on the job. The multi-colour, sleek design with small thumb guards makes for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, moulded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools.
Specifications
Type:
Side-Cutting Pliers
Application:
ACSR, screws, nails and most hardened wires
Special Features:
Integral guards help prevent hand contact with conductive parts.
Overall Length:
9.53'' (24.2 cm)
Material:
Induction-Hardened Steel
Nose Type:
New England
Jaw Length:
1.594'' (4 cm)
Jaw Width:
1.25'' (3.2 cm)
Jaw Thickness:
0.613'' (1.6 cm)
Knife Length:
0.797'' (2 cm)
Cut Style:
Side-cutting
Joint Type:
Hot-riveted
Handle Colour:
Orange/Grey
Handle Finish:
3-layer
Handle Length:
5.58'' (14.2 cm)
Insulated:
Yes
Weight:
1.3 lb (0.6 kg)
UPC:
092644701948
Additional Information
Warnings
- Whenever possible, always switch off lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with a live source.
- Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with a live electrical source.
- Always inspect your tools before use.
- Always wear approved eye protection.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact a live electrical source.
- Keep tool clean, dry and free from any surface contaminants.
- Destroy tool if the insulation is damaged in any way.
